These Luer Lock Plug Fittings are Non-vented Double Dead Ender Caps. Made of Polypropylene (PP), and Yellow in color. They are standard Male Luer Lock on one end and Standard Female Luer Lock on the other end. They are considered "dead stop" in that they do not allow anything through the middle. Their unique twist lock design make them ideal as a quick-disconnect for your Biomedical or Bioprocess applications and cap them off, whether you have Male or Female Luer applications. Compatible with any standard Luer fitting, or Luer syringe.
These are multi-purpose fittings and may possibly be used for Automotive, Boat (Marine), Hydroponic, Irrigation, Pneumatic, Agriculture, Plumbing, and Aquarium applications.
|Part#: || KITCP-PP-YLW|
|Material: || Polypropylene (PP)|
|Size 1: || Standard|
|Size 2: || Standard|
|Type 1: || Male Luer|
|Type 2: || Female Luer|
|Style: || Luer Lock Double Dead Ender Cap|
|Color: || Yellow|
- Temperature Range: -9 °F to 150 °F (66 °C)
- Pressure: 125 psi @ 70 °F*
- Radiation stable and is resistant to solvents, chemicals, water and other inorganic environments.
- Resists most strong mineral acids and bases; however, it is subject to attack by oxidizing agents.
*Pressure applies to the material characteristic of one-piece molded fittings. Luer Lock pressure may differ.