This is Classic-HHO's high quality 316-grade and 18/8-grade Stainless Steel Hardware Kit. These parts are hard to find in this small quantity, especially of 316-grade quality. This is the best hardware available for making your tower to lid connections. After winding your tower with 316L grade Stainless Steel wire, why settle for anything less than 316-grade hardware to complete your under the lid electrode connections?
Please Note: Hardware Kit may differ slightly due to change in parts usage for our cell tower building. Newer pan-head electrode bolts do not require an extra 316 flat washer to secure the electrode wire loop. And we've eliminated the necessity for the lock washer. So, your kit may not include two of the 316 flat washers and the two lock washers (refer to parts kit contents below). The omission of those couple pieces will not affect your ability to make your lid-to-tower connections and/or assembly. It just may differ from your current cell's assembly (if applicable), if you have an older version cell unit or hardware parts kit. Any questions, please contact us.
Below the lid hardware:
- Two (2) - 1/4-20 316-grade Stainless Steel bolts
- Four (4) - 316-grade Stainless Steel flat washers
- Two (2) - 316-grade Stainless Steel hex nuts
Above the lid hardware:
- Two (2) - 18/8-grade Stainless Steel flat washers
- Two (2) - 18/8-grade Stainless Steel lock washers
- Two (2) - 18/8-grade Stainless Steel hex nuts
- Two (2) - Zinc Wing Nuts (high-temperature painted red and black)