Home > By Hose-Barb Size > 1/4" Hose-Barb >

1/4" x 1/4" Hose-Barb Thru-Panel Elbow Adapter w/ Hex Nut - White Nylon/NN
1/4" Hose-Barb Thru-Panel Elbow with Hex Nut - White/Natural Nylon


 
Alternative Views:





Availability: Contact us for Quote
SKU / PART#: KITPL4-4-4WN


Custom Washer:


Ready-stock not available, please contact us for a quote.
DESCRIPTION
 

These Elbow Thru-Panel Adapter fittings are 1/4-18 NPSM (National Pipe Straight Male) in the middle to fit with the included 1/4-18 NPSF Hex Nut, and 1/4" OD Hose-Barb on each end to fit with 1/4" ID hose or tubing. The 1/4-18 NPSM will fit through about a 1/2" bore hole, to sit up with the flange, and be secured with the Hex Nut on the other side. The fitting is made from White Nylon (WN), and the hex nut is made from Natural Nylon (NN). See material properties below.

These are multi-purpose fittings and may possibly be used for Automotive, Boat (Marine), Hydroponic, Irrigation, Pneumatic, Agriculture, and Aquarium applications.

Add a Custom Washer: available in Red Silicone or Nitrile (Buna-N). Custom-designed to fit over 1/4-18 NPSM of our Thru-Panel Fittings. See material properties below.

Part Specifications

Part#: KITPL4-4-4WN
Material: White Nylon
Thread 1: 1/4-18 NPSM
Hose-barb 1: 1/4" OD
Hose-barb 2: 1/4" OD
Hex Nut: 1/4-18 NPSF x 11/16" Hex, Natural Nylon
Optional Washer: .750" OD x .512" ID, .063" Thick, Silicone or Nitrile (Buna-N)
Style: Bulkhead Elbow Adapter

White Nylon (WN)

  • Temperature Range: -50 °F to 275 °F (135 °C)
  • Pressure: 125 psi @ 70 °F*
  • Made from 6/6 nylon - exhibits good tensile strength, moderate stiffness, high impact resistance and tensile strength.
  • Resistant to fuels, lubricants and many chemicals, but vulnerable to attack by phenols, strong acids and oxidizing agents.
  • Used in fuel line, vacuum systems and general purpose applications: automotive industry approvals.

*Pressure applies to the material characteristic of one-piece molded fittings. Luer Lock pressure may differ.

Natural Nylon (NN)

  • Temperature Range: -40 °F to 210 °F (99 °C)
  • Pressure: 150 psi @ 70 °F
  • Exhibits strength, moderate stiffness, high impact resistance and tensile strength.
  • Resistant to fuels, lubricants and many chemicals, but vulnerable to attack by phenols, strong acids and oxidizing agents.
  • FDA, USDA, NSF and 3A-DAIRY compliant.

Silicone (S) (RSW)

  • Temperature Range: -65 °F (-53 °C) to 400 °F (204 °C)
  • Autoclavable
  • Food Grade
  • Excellent weathering properties and handles both hot and cold temperature extremes
  • Chemically resists oxidizing chemicals, ozone, concentrated sodium hydroxide, potassium carbonate.
  • Fair performance when exposed to acids, some solvents, and alkalis; potassium hydroxide.
  • Poor resistance to Oils, most Solvents, Fuels, Ketones, Acetone, and Hydrocarbons.
  • Odorless and Tasteless.
  • Commonly used in applications involving vacuum routing, agriculture, biomedical, and food processing.


Nitrile Rubber (Buna-N) (NBR) (NBRW)

  • Temperature Range: -40 °F (-40 °C) to 257 °F (125 °C)
  • Excellent resistance to petroleum-based oils and fuels, silicone greases, hydraulic fluids, water and alcohols.
  • Commonly used in applications involving automotive fuels and lubricants, and oil resistant applications of all types.
  • Low compression set, high tensile strength, and high abrasion resistance